Understanding the right way to exchange a dryer belt is important to the efficiency of your dryer. The belt in your dryer wraps across the drum after which over the motor. If the tumble dryer will not spin, will not spin correctly, or will not spin in any respect, there’s in all probability an issue with the drive belt. Likewise, in case your dryer is making a thumping sound, the dryer belt might must be changed.
Regardless of the motive why your tumble dryer just isn’t working, changing the dryer belt is a fast and simple job that you are able to do your self at dwelling. In fact, seek the advice of knowledgeable in the event you desire, however with some primary instruments and a easy step-by-step process, your dryer will probably be again to drying your laundry very quickly.
We consulted the consultants who restore dryers for a residing for his or her information to maintaining your greatest dryers in good working order. Do you suppose it is previous? Think about upgrading to among the best washer dryer combos.
Tips on how to exchange a dryer belt
What you want:
• A alternative drive belt
• A screwdriver
• Pliers
Indicators you want to exchange a dryer belt
Earlier than you begin disassembling your dryer, look out for these indications to verify that your dryer belt must be changed, stated Andrew Brown, an equipment restore technician at This Fastened Home.
• Noisy operation: A straightforward solution to inform in case your dryer belt is damaged is that if it makes a loud thumping, squeaking or scraping noise. If the drying belt turns into unfastened or stretched, it can bump in opposition to the drum throughout rotation. If the drying belt is ‘frayed’ it can create a scraping noise when it contacts the drum,’ explains Brown.
• Turning issues: “If the dryer belt is broken, it may be tough to take care of a constant grip on the drum,” says Brown. “This causes uneven rotation and results in poor drying efficiency.”
• Seen put on: Usually inspecting your dryer belt for seen indicators of wear and tear, similar to cracks within the drum, can decide if it is time for a alternative.
• The age of the dryer: “Dryer belts are designed to final between 5 and 10 years,” says Brown, “in case your dryer is inside this age and has by no means been changed earlier than, then it is in all probability the dryer belt’s fault that your dryer is not working.”
Tips on how to exchange a dryer belt
Earlier than starting the alternative course of, it is very important get your new drive belt. You may search the dryer mannequin on-line to search out the appropriate drive belt on your dryer, however it’s also possible to discover the mannequin quantity on the within of the drive belt contained in the drum.
1. Unplug the dryer
First, unplugging your dryer’s energy provide is a necessary security measure.
2. Give it area
In case your dryer is in a counter or cupboard, it is a good suggestion to drag it out so you’ve got sufficient room to maneuver across the dryer.
3. Clear it up
Unscrew the connection protect and take away any lint or particles (remember to preserve all of the screws in a single place, in case you lose them).
4. Disassemble
Tips on how to disassemble a dryer can range relying on the mannequin, so search for screws and clips to see the place the panels are. Take away the highest and entrance panels and set them apart. If there are wires or cables connecting the entrance panel to the dryer, take away them earlier than lifting. It’s best to now have the ability to see and entry the drum and belt,” says Brown.
What the knowledgeable says…
Brown notes, “You must preserve the trail of the belt in thoughts earlier than you take away it. It would run across the drum, loafer pulley and motor pulley. A great tip is to take an image of the entire thing and the place it wraps across the drum. You will need to replicate this when putting in the brand new belt’.
5. Take away the belt
Take away the outdated belt by gently sliding it off the drum. “Chances are you’ll must loosen pressure on the loafer pulley to do that.
6. Connect the brand new belt
Place the brand new belt across the drum ensuring it’s in the identical place because the outdated one, it will guarantee it maintains correct pressure.
7. Reassemble the dryer
Now assemble the dry climate by changing the entrance and aspect panels, reconnecting any wires and securing with screws. Make sure to reinstall the lint display screen as properly.
8. Test if it really works
Lastly time to check the dryer. Brown advises “plugging the dryer again in and operating it for a couple of minutes to ensure the belt is correctly put in and the drum is spinning easily.”
